Supplying & Placing office table in completely knock down conditions with an overall size 1800mm X 750mm X 750mm that is to be assembled at site. The table top shall be made up of 25mm thick Pre-laminated particle board approved laminate and finish as per approved shade. The table top profile shall be in rectangle shape with round front and back and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size  of board panel and duly pasted with the assistance of edge banding machine at 200 degree celsius. The table shall be supported on particle board base gable end. The end wall of the table on the side shall be topped by gable end.It should be made up of 25mm thick Pre-laminated particle board and profile shall be in linear shape with full round post form and other edges sealed with appropriate PVC edge banding. The table shall be clad with 18mm thick  modesty panel which provide structural support for the table. It should be 18mm thick pre-laminated particle board with appropriate PVC edge banding connected with both end. An overall size 900mm X 450mm X 750mm. The storage shall be made up of Pre-laminated particle board of finish as per approved shade. The top shall be made up of 25mm thick and other parts like side, back, shutter, facia, skirting shall be 18mm thick. The storage shall be supplied with 2 nos. of shelves. Door shutters shall be provided for opening/ Sliding and closing the storage. The shutter shall be operated with concealed crank hinge and die cast handle as well as proper locking arrangement. There shall be buffers provided at the bottom to avoid scratches on the floor.